i just built my blaster and i did a full fmf exhaust, vitos carbon reeds, reed spacer and a mikuni flat side carb 28mm. The tors is eliminated on the carb and the bike is an 03'. i got the bike started fairly easy but the bike wont hold an idle and doesnt rev up. i just removed my oil injection and i found gas in the oil and drained that. the bike has new air filter and holes drilled in airbox. i heard that the 03's have a tors wire on the ebrake and i disconnected it b/c i extended the bike. im takin the whole tors wiring in the front of the bike out today and seeing what happens. Any advise is appreciated i dont know what jet i have in it will check today. Also on the oil block off i left the pump on and i know your suppose to take it off but i couldnt get the shaft out form underneath it so i left it in! thanks let me know!!!
