blaster lost spark

mattsteibler26

New Member
Dec 8, 2011
180
1
16
I was riding my blaster that i just got the guy before me just put a new stator and coil and in it and when i was riding it it just shut right off and now has no spark at all. I was riding in the snow Idk if that has anything to do with it, but what can be the problem now ?
 
Just because it's new doesn't mean it can't fail :o. Start testing everything, ohm coil, plug boot, stator. Yes, new stators can take a $hit, Check continuity of ALL wireing/switches. Check that all grounds are CLEAN and tite. Add dab of dielectri grease to all conections. If everything checks out it's your cdi.

I've had to use a Dremal on female bullit connectors to remove green weinnies before.

Did you check that your switch was on?8-|
 
I had the same problem a few months back it turned out to be the ignition coil on the new stator going bad. I had two brand new coils on the stator go bad back to back. If i were you I would test all your components and see what the ohm out at