Blaster Brakes

Sisbro Racing

New Member
Jun 16, 2009
1
0
0
I need to covert my daughters 1998 race Blaster to hydraulic brakes front and rear. Any advice would be greatly appreciated.
 
I need to covert my daughters 1998 race Blaster to hydraulic brakes front and rear. Any advice would be greatly appreciated.

What do you want to know.I could fill this page up with info.I have 2 blasters with the shee hydro conversion.If you want send me a p.m. with your email addy and I will send pics and some info on the setup.Also are you running stock a-arms or aftermarket.LMK
 
I bought a kit off ebay to convert my 02 blaster and it had everything i needed and bolted right up i was amazed how easy it was
 
for the front i also used a banshee set up they do work you just have to drill out the upper a arm hole and drill and tap some holes for set screws other then that they bolt right on also the banshee set up works better if you have aftermarket a arms. but if you can find someone who has a set off a 03-06 blaster they will bolt right on without any modding. as far as the rear goes you can use just about any set up off of any other quads and most sport bikes you will have to make some brackets to get things to work but they work great.
 
will yamaha warrior hydro breaks work on the blasty an is it really gonna be a lot better handling on it