This might be a dumb idea but would a banshee or warrior axle carrier bolt up to a blaster swingarm? I can get both carriers for $40 with good bearings.
Any info would be great
Any info would be great
Blaster axle carrier question
- Thread starter yamahablaster19
- Start date
They will not just bolt up.Some have added washers and or spacers but it never works right and causes too much slop and the chain loosening up.Your best bet is to get the banshee axle and a banshee or warrior brake hub.It will all swap right in and your existing rotor,sprocket hub,sprocket,axle nuts, will go right on the banshee axle.It will give you about 1 5/8 wider per side.You can retain your stock 88-02 mechanical brakes by adding some washers and or spacers on the caliper.Upgrading to hydraulic rear brakes is a good investment also.
Thanks I'm needin a carrier and sprocket hub for my 99 blaster and I couldn't find one. I found a banshee and warrior carrier axle and all for $40 each
If you need one, pm me. I have one from the range of 99-02 (so still old one) and we can sell it...
Banshee need help
It's a long story 4 mill stroker cooled head timing plate runnin klutz 118 w/ SMS oil intercepter 32/1 so after about 5 min or so the rite side stopes firin ? More to it but that's the base point
It's a long story 4 mill stroker cooled head timing plate runnin klutz 118 w/ SMS oil intercepter 32/1 so after about 5 min or so the rite side stopes firin ? More to it but that's the base point
Similar threads
