blaster 4 sale

[coop]

have complete bottom end, has brand new still in box wsm 40 over piston fresh bore new vitos gaskets, have reeds and carb. Has an all black frame got good rear tires has hydraulic rear brake, have all plastics, one crack on front fender, have stock exhaust. the I sprayed wd 40 in the crank and had it covered, i just removed for pic. The top end needs a good cleaning the guy i got it from used liquid gasket on the head as well. located in central new york. $500 click link for pics

 

[coop]

Blaster Slideshow by sscindercoop | Photobucket

 

[Blaaster]

Coop, pour some 2 stroke oil in the motor, especially on the big end bearing and down the drillings that feed the main bearings.

Gently revolve the motor over a few times to wash off all the WD40.

WD40 will solidify after a period of time and gum up the works.

 

[coop]

Coop, pour some 2 stroke oil in the motor, especially on the big end bearing and down the drillings that feed the main bearings.

Gently revolve the motor over a few times to wash off all the WD40.

WD40 will solidify after a period of time and gum up the works.

Ok will do, I didn't actually use wd 40 its a napa brand motor flush but i figured it was about the same thing. Thanks for the advice its greatly appreciated.

 

[Blaaster]

If I am leaving a top end off for any period, I usually stuff it with oil soaked lint free rag.

It is a good idea to isolate it from the air to avoid moisture.