Best wheelie sprocket

[Dave16]

I want to know which front sprocket is the best for wheelies. I've seen 12, 13, 14, 15 and, 16 tooth sprockets. I'm not sure which one to buy. So could somebody tell me which sprocket is the best wheelie sprocket on a blaster. And are there any rear sprockets I could put on for like maximum torque and sweet wheelies too?

 

[specialized7]

go with a 12, but you wont have any top speed.
stock is 13 i belive

 

[mr_3_0_5]

it matters how you ride.. i have a 14 tooth and can lift it in 4th the higher # sprocket in from the more top speed but everything works togeather if you have 18" tires your top speed is gonna be lower then if your running 22" tire's

 

[Paulie B]

Stock is 14.
I don't think a 520 chain will wrap around a 12 and the 16 won't fit.
Go wit the 13.

 

[hickskateboarder]

sorry paulie but i'm pretty sure ur wrong on this one. both my blasters, stock when i got them with the exception of the 02 having a dg silencer, both had 13 tooth on the front.

 

[hickskateboarder]

oh but about the wheelies- with a pro circuit pipe and v force reeds, you should be able to get that thing in powerband in 2nd gear and hammer it and pull up a little and flip the thing over backwards....... i can get mine up in 4th with 14 tooth front and a crappier pipe and reeds.

 

[Dave16]

Alright I will get the 14 front. Anything on the rear sprockets?

 

[Paulie B]

sorry paulie but i'm pretty sure ur wrong on this one. both my blasters, stock when i got them with the exception of the 02 having a dg silencer, both had 13 tooth on the front.

It happens B-)

 

[coreyownz]

i was gonna say.. stock is 13 stay with it otherwise lower no topend

 

[SR-powered-240]

Well if this helps you out any, the more teeth you have on the back sprocket, the more torque you'll have but you'll lose topend. The more teeth you have on the front sprocket, the less torque, but the more top speed youll have. I found you sometime have to play with the ratios to get it perfect, but I would say if your trying to keep a decent top speed but increase accl. then I would go a few teeth bigger on the back sprcket.