banshee axle carier?

[foolish913]

does anybody know if a banshee carier will work on my 2000 blaster i want to build another rearend with a banshee axle an brakes but my axle carier wont work with out rigging it up

 

[bkg479]

not sure if the actual carrier will fit, but on 03 and up Blasters, Banshee axles go right into a Blaster carrier, so if you wanted, you could go get a Blaster Carrier 03+ and use a Banshee axle in that carrier not your old one.

 

[foolish913]

i looked for a newer model carrier the only ones i found were like $150 im realy not trying to pay an arm an a leg thats why i was wanting to use the banshee rearend theyre cheaper an i know that the brakes will bolt right up

 

[bkg479]

Idk you need someone elses opinion i dont think that a banshee carrier is going to just fit in

 

[xjma]

I searched and found out that the banshee carriers bolt right up to the blaster, and that the banshee carriers are the same thing as the 03 + blaster carriers. I don't know this personally, just did a search. Check this out http://www.blasterforum.com/suspension/599-pic-my-rear-hydraulic-brake-conversion.html

I searched ebay and it seems like you can get a banshee carrier for pretty short money. Throw new bearings in it and voila, you're all set.

You can also find banshee axles for really cheap....but you usually get what you pay for and who knows if the axle is bent or not?? But if you have to buy two 5 dollar banshee axles plus 15 for shipping to get a straight one it would still only cost 40 bux for a banshee axle.....

Make sure you get a stock banshee carrier though! It's funny how the aftermarket "racing" carriers are the same design that suzuki and honda were using back in the early 80s!!

 

[foolish913]

thanks thats what i wanted to hear like you said the banshee carrier is cheap an i cant find an 03 to 06 blaster carrier anywhere an i was planing on buying the banshee axle to widen the back thanks again for the help

 

[Cossey44]

This post is oldddd! But I have an entire rear end available for anyone who can offer me a fair price. I will also post something under the market page. This includes:
The rear bearing carrier, rear swingarm, and the positioner.