Axle nuts on a blaster

[frankin blaster]

Ok so today I'm working on my bearings I got one axle nut off fine but the second one is tough I'm wondering if it may be backwards thread and light on this problem would be good I have heated it up but still no luck

 

[scotj77]

they are just a mofo to get loose. lots of pb blaster and heat was how i got the last one i messed with loose. not reverse thread. cant hurt to wack the nut a couple times with a hammer just to try and vibrate it free a little. just don't hit anything but the nut and don't beat the hell out of it. just tap it some

 

[79xs]

I ended up using a large pipe wrench on mine.

 

[scotj77]

I ended up using a large pipe wrench on mine.

same here............

 

[frankin blaster]

Never mind ladies and gents I got her off will post some pics when I get to a computer on Tuesday it's gonna look great

 

[frankin blaster]

they are just a mofo to get loose. lots of pb blaster and heat was how i got the last one i messed with loose. not reverse thread. cant hurt to wack the nut a couple times with a hammer just to try and vibrate it free a little. just don't hit anything but the nut and don't beat the hell out of it. just tap it some

That's exactly what I did but used wd-40 and two monkey wrenches (pipe wrench) and a 3 foot breaker bar with all my 130 Pds on it jumping up and down looking like an idiot lmao