Air Box hole

[B_blaster.25]

I cut a hole in my air box, would i have to do any jetting changes or not? the hole is only about 1-2 in. by 3-4 inches (not really sure on the dimensions) but i didnt think it would do enough to effect to much, please let me know if i am wrong and if i have to or not. Thanks

 

[motoman9911]

Could probably go up one size of the main jet.

 

[blasterfreek30]

u might have to bump the main up 1 size....more air needs more fuel

 

[motoman9911]

Is there an echo in here?

 

[blasterfreek30]

Is there an echo in here?

i know .....u are just too fast

 

[motoman9911]

I'm a ninja.......

 

[B_blaster.25]

Ok thanks i will I:I

 

[YFS101]

+1

normally I would just remove the snorkle rather then cut up the box or lid
either way, these guys are right and you should go up a size and do a plug test. If its too rich then drop back down

 

[B_blaster.25]

Ok, I have already removed the air box lid altogether. Thanks for the info will give it a try when the bike gets put back together. I:I

 

[B_blaster.25]

Oh wait, where exactly is the main jet. I am not that great when it comes to jets and the carb, any info would help, pictures would be awsome. Thanks