Ok thinking about advancing my timing but I want to know what it does for a bike and how many degrees is best for the trails and should I list my motor setup or setup(s)Hehehehe
Advancing timing
- Thread starter speedemon17
- Start date
+3 or 4 degs will give some noticable low/mid but will take a little off the top.
A pipe like a DMC Alien works well with a +4 advance.
http://www.blasterforum.com/engine-13/more-hassle-than-gains-worth-44236/
A pipe like a DMC Alien works well with a +4 advance.
http://www.blasterforum.com/engine-13/more-hassle-than-gains-worth-44236/
Last edited:
There is a thread somewhere on DIY plate mod, IIRC you can't advance it more than 4* because pick-up coil hits, or something. +4 is about all you want anyhow.
On mine I noticed it most mid range and didn't really notice anydiff on top. Trail port, Fat Bastard pipe.
On mine I noticed it most mid range and didn't really notice anydiff on top. Trail port, Fat Bastard pipe.
Ya, guess you have to mention the trade-offs, as with any mod. also if a person is cheep and only runs regular gas be aware of deto, might have to run premium.
Similar threads
