a arms

[tjsdaname]

Burgard Cycle :: YAMAHA :: BLASTER :: Standard A arms for Yamaha

okay its says you need to ream your spindles...... what does that mean?:">

 

[Blasterb0y794]

A reamer or ream is a tool used in machining to make existing holes dimensionally more accurate and to improve surface finish

 

[tjsdaname]

A reamer or ream is a tool used in machining to make existing holes dimensionally more accurate and to improve surface finish

so does it actually need to be done???

 

[Blasterb0y794]

ehhh, ive never had it done, but the parts will line up alot better

 

[blasterfreek30]

isnt reaming just basicly, making the hole bigger?

 

[Blasterb0y794]

yup, just for a smoother fit, if it doessnt cost extra just get it

 

[Master_Blaster]

U have to because Burgard A Arms use a bigger upper balljoint they wont fit into the spindles.

 

[jar1zx]

mine fit good. after i took the cap off

 

[245stroker]

when you ream the spindles it also tapers the hole to match the taper of the ball joint.

 

[yamahaulling]

Its a tapered remming tool. Its kinda important becuase the ball joint that come with the buggard arms is tapered. It was 55 because for the bit or i payed 20 bucks at a local machine shop. A tight fit is important!!!