a arm rebuild kits

[greasemonkey85]

hi guys, i m new to the forum, and i just recently bought a blaster......this my first post......

anyways, my front end needs rebuilt. the guy at the dealership said i could just replace the bushings and they were $14 bucks a arm, so like $60 to do uppers and lowers, but they dont come with the dust caps or pivot pins. i have seen kits from pivot works for like $90 for uppers and $90 for lowers, so that is like $180. then the guy at the dealership said i could get a bushing kit from moose for like $150 total for both sides, uppers and lowers.

i have been searching for hours and cant seem to find anything on this topic.

just wondering on what a good replacement would be, i m not racing, just pretty much aggresive trail riding every weekend.

thanks for the help in advance, and this forum is great!

 

[Kgibson]

Before I spent that much cash for a rebuild I would buy some +2 NEW OR EBAY

And Welcome!

 

[slickerthanyou]

I know i didn't pay nowhere near that much when i replaced my stuff, let me find my reciepts....

I didn't replace the caps, mine were good, this is what I got- does upper and lower- http://cgi.ebay.com/ebaymotors/ASR-Yamaha-Blaster-A-Arm-Bushing-Pivot-Pin-Kit-_W0QQcmdZViewItemQQhashZitem53e46c4ad0QQitemZ360314587856QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

 

[greasemonkey85]

ok thanks you, i jsut went out and check it one more time before i order the stuff, and the bottoms are tight. i am going to order the moose upper kit, it will cost like $50 for the kit, and i need swing arm bearings to match so, i ll get those too.

thank you all, i will be posting about a exhaust setup too, thanks for all the help.

 

[mmajay]

You should tear it apart first and check wear, you might only need the plastic which is cheap.

 

[ZoMbIeCuStOmS]

ignore it till the wheels fall off lol