A-Arm ball joint

Master_Blaster1

New Member
Nov 22, 2013
8
0
0
So I have a problem, the ball joint on my bottom A-Arm is mushroomed and the threads are jacked. I was going to cut the threads off so there is just the steel shaft left. Then Tig Weld grade 8 threads on top of it. lol I know this is a bad idea, anybody ever done this? If so did it fail like I expect it to?
 
So I have a problem, the ball joint on my bottom A-Arm is mushroomed and the threads are jacked. I was going to cut the threads off so there is just the steel shaft left. Then Tig Weld grade 8 threads on top of it. lol I know this is a bad idea, anybody ever done this? If so did it fail like I expect it to?

Be prepared for a very big tree to walk out in front of you when you are up to a high speed.

Not a good idea.