before the haters start running there mouth and hatin on me... the banshee is fun but its not what i need.. short of spending big bucks on a 2-1 carb set up and a 2-1 pipe for the kid of riding i do, its not for me..
99 yamaha banshee, cut front fenders, aftermarket headlights, 909 bars, pro circuit platnuim pipes, with 304 stainless silencers.. sound great!!! no cracks in plastics, just stress marks, seat in great shape just stained, polished itp rims all around but need a good cleaning and polishing, 20'' holeshots on the rear
carbs were just sync'd and are DEAD on!!!! firsts on the 1st kick most of the time. run on 93 octain with klotz techniplate at 32:1 onyl about 2 hours on top ends... pulls very hard and is very fast..
does need some minor stuff.. needs a grab bar, and front bumper and a arms repainted, but dont effect the riding of it, all brakes work someone lookin to go fast this is your machine!!!
looking for a nice blaster..... would prefer one with mods, but im open to all offers..... would also consider a 87-92 lt250r
located in fond du lac wi, 54935 cannot deliver. bill of sale only, but is clean... more details to serious enquirers
here is a vid of it running.... this was before the carbs were sync'd and its much more responcive now. .... it does need to be rejetted nw that its warmer...
DSCN0866.flv video by 4cfed88 - Photobucket
looks the same as pics except front fenders are cut.. and it was washed!!
99 yamaha banshee, cut front fenders, aftermarket headlights, 909 bars, pro circuit platnuim pipes, with 304 stainless silencers.. sound great!!! no cracks in plastics, just stress marks, seat in great shape just stained, polished itp rims all around but need a good cleaning and polishing, 20'' holeshots on the rear
carbs were just sync'd and are DEAD on!!!! firsts on the 1st kick most of the time. run on 93 octain with klotz techniplate at 32:1 onyl about 2 hours on top ends... pulls very hard and is very fast..
does need some minor stuff.. needs a grab bar, and front bumper and a arms repainted, but dont effect the riding of it, all brakes work someone lookin to go fast this is your machine!!!
looking for a nice blaster..... would prefer one with mods, but im open to all offers..... would also consider a 87-92 lt250r
located in fond du lac wi, 54935 cannot deliver. bill of sale only, but is clean... more details to serious enquirers
here is a vid of it running.... this was before the carbs were sync'd and its much more responcive now. .... it does need to be rejetted nw that its warmer...
DSCN0866.flv video by 4cfed88 - Photobucket
looks the same as pics except front fenders are cut.. and it was washed!!
Last edited by a moderator:
