My plus four swinger ain't here yet but had time to pull out the stock shock and install the 400ex shock I drilled out the bottom mount for the pin I thought about getting those Ken oconnor bushings but being cheap I'm gonna drill a 10mm hole through the stock upper bolt then cut 2 pieces out of it to use as bushings then I will use a 10mm bolt to tie it all together plus I'll use a couple washers to limit the side to side play I'll toss up some pics in a bit I'm on my phone and I have no idea how to load pics from it .
400ex shock
- Thread starter DirtDiggler
- Start date
ok heres some pics , can't wait much longer for my swinger , I needs me some dunes to shred !!!!!!
my filter set up is simple , the way i like things , It does need a support bracket , need to do that next week-end and by then I'll have the bolt drilled out and the shock permanantly mounted . once my swinger gets here I'll get that installed , then with the exception of the chain , the ass end is done , and the front suspension is next . asr a arms , shock relocation kit for the 450r's and then just bleed the brakes and rip it
