gonna throw this on here for a few days before it goes back on ebay
trued and welded < so not worth the hassle for me to do a long rod on it,
if i wasn't throwing a long rod onto a +4, i'd run it
nice and tight, all spec'd out good, no up/down rod play, side to side is well within specs too
but...the threads on the flywheel side have been re-tapped to a different thread than stock, done by the previous owner, a brand new nut and the stock thick washer will be included
$75 shipped anywhere in the 48 states
PM me if interested, i'm not playing 50 questions in this thread everyday
trued and welded < so not worth the hassle for me to do a long rod on it,
if i wasn't throwing a long rod onto a +4, i'd run it
nice and tight, all spec'd out good, no up/down rod play, side to side is well within specs too
but...the threads on the flywheel side have been re-tapped to a different thread than stock, done by the previous owner, a brand new nut and the stock thick washer will be included
$75 shipped anywhere in the 48 states
PM me if interested, i'm not playing 50 questions in this thread everyday
Last edited:
