30mm oko carbs

[foxracingkid22]

ok so i'm not to sure whats wrong with my carb its a 30mm oko trenga carb, and every time i turn the carb on there is fuel coming out a little hole on the bottom of the side facing outward(if that makes any sense) but i'm not sure if there is a hose that runs to that or not. its on a 2000 blaster with a 40 over bore kit toomey exhaust swing arm extended 4 inches back, the trenga carb, front fenders chopped and a twist throttle. also wanting to kno if there is anything else i could do to it. different size sproket help?

 

[brandoz28]

sounds like the float is sticking or there's junk in the needle and seat. float may need adjustment

 

[foxracingkid22]

ok well i took it apart and cleaned it but how do i adjust the float

 

[Surfrjag]

i googled it for you Float Level Adjustment

 

[slickerthanyou]

And yes you should attach a hose on that nipple and have it hang between the swinger and the frame pointed towards the ground.

It's the Pink hose in my sig comming off the bottom of the carb!