28mm Carb question

[Mr.Aaron]

I picked up a 28mm Mikuni FS carb and turns out the stock intake boot is a little to big to fit the carb. I was wondering for those that run this carb what you did to make it fit?

Also where can I find a jets or a jet kit for this carb?

Appreciate all the help guys!

 

[mr_3_0_5]

push it in hard. lol..i guess you could dremel the boot a little..

 

[Mr.Aaron]

push it in hard. lol..i guess you could dremel the boot a little..

It's not that the boots to small, the boots to big for the carb. I tried to clamp it down all the way but the carb can just slide right back out. So the boots not grabbing the carb and holding in place.

 

[cirame1]

yea i bought a regular metal hose clamp form the hardware store and used that it works fine. as for jets any bike shop will have them get mikuni hex main jets they r the same as the stock carb. ur pilot jets r different though.