harley1-5 Active Member Jul 28, 2013 3,465 236 115 Elko County Nevada Aug 16, 2014 #21 awesome glad its working out for you Reactions: undergroundart
rich1 Member Jan 6, 2014 871 79 64 N.C./RTP Aug 16, 2014 #22 undergroundart said: just had to tap on the tranny bearings a little. put it all back together and it all spins and shifts decent. spent a ton of time doing thins but I really did learn a lot. im not nervous about tearing into the bottom end at all anymore Click to expand... Glad it worked out . BTW... Honda does not shim the trans bearings that's why the gasket thickness is important too. Reactions: undergroundart
undergroundart said: just had to tap on the tranny bearings a little. put it all back together and it all spins and shifts decent. spent a ton of time doing thins but I really did learn a lot. im not nervous about tearing into the bottom end at all anymore Click to expand... Glad it worked out . BTW... Honda does not shim the trans bearings that's why the gasket thickness is important too.
undergroundart Member Oct 25, 2013 189 13 69 42 South Dakota www.undergroundartstudiosd.com Aug 22, 2014 #23 got it out to the track and broke in tonight. gotta play with the jetting a little though and get it dialed in
got it out to the track and broke in tonight. gotta play with the jetting a little though and get it dialed in
harley1-5 Active Member Jul 28, 2013 3,465 236 115 Elko County Nevada Aug 22, 2014 #24 awesome wrench on bro Reactions: undergroundart