2002 rear brake

[dlporkchop]

I need help with mounting the rear master cylinder to my frame & extending the distance from my brake pedal?

 

[Awk08]

you gotta get some 1/4 steel bar stock, i used some that was about 1" wide, then just start holdin the master in place and make some cardboard templates, but get an extension tack welded onto the pedal and connect the master to it, then hold it all in place together so it all lines up, see here, then holler if ya need any other help.......................
http://www.blasterforum.com/suspension-14/rear-hydros-19792/

 

[Country Blaster]

Here is a quick shot of my 05 frame, let me know if you need any other pics
or measurements.Hope it is of some help.I:I

 

[Awk08]

/\/\/\/\ thats a good shot bro, i'v always wondered if the way i did it was even remotely similar to the factory mount, and now i see that it is

 

[super noober]

here is the quick bracket we made for my old frame when i put the hydros on. what do you mean by extending the distance between your brake pedal?

 

[98 tunner]

Here is a shot of my mount.

 

[yb200]

Here is a shot of my mount.

thats the best one i have seen yet......nice work!!!!

repp.........

 

[foolish913]

98 tunner has the best looking one so far in my opinion heres how mine is

 

[98 tunner]

Here's the pics you wanted, hope they help

 

[dlporkchop]

blew up motor

I just installed a new exhaust gasket, intake gasket, air filter, vent & fuel lines and a new NGK Iridium plug. Does anyone think the Iridium plug could have caused excess heat in the cyclinder or possible I was running to lean? Thanks