I just bought a blaster and test rode fine. I took it out and after riding it for 20 minutes it started idling really high on its own even with the clutch in. The kill switch didn't work for a minute either and it was sitting there screaming. The guy I bought it from put a new seat for the carb needle in it. Am I getting air in it? What do you guys think. It has been bored 90over. The 2 inch hose coming out the back of the carb slides off way to easy just by pulling on it. And I also wander if the guy I bought it from jacked up the carb when putting. The bushing in. Can anyone help please.
2000 blaster idle high
- Thread starter jtrio5
- Start date
Sounds like you got a airleak somewhere bud....search how to do a leak down test and how to build a Leakdown tester.....and if I was you...I wouldn't ride it till this is fixed...cause you could blow it up then you'll be sh*t outta luck....
my guess is that you are in a cold climate and it isnt rejetted and you are running hot enough that the heat itself keeps the process going
or the carb is really dirt
or others
or the carb is really dirt
or others
