Hi guys , I'm new to this site. Just got a 2000 blaster and have been working on getting it fixed.Already got the tors removed. The problem I'm having is as follows. The wiring diagram for a 2000 shows a yellow wire with a red chaser. I have this wire on it. However , The only plain yellow wire I can find is the wire inside the headlight with a plug in on it. Should there be a plain yellow wire running into this wire ? Thanks for all the replies in advance. This is a awesome site.......... Anthony.
2000 blaster headlight wiring
- Thread starter blasterguy85
- Start date
Just went out and double checked everything. The yellow/red wire runs to the butt splice , then up into the light switch/ kill switch. The other splice has a green wire that attaches to the bulb assembly. There is a blue wire and a plain yellow wire in the light housing. I could really use some help on this one. Thanks alot guys......... Anthony.
There are wiring diagrams in this free downloadable manual.
http://www.blasterforum.com/general-support-17/downloadable-yamaha-blaster-manual-17325/
03+ supplement:
http://www.blasterforum.com/do-yourself-20/03-06-blaster-repair-manual-supplement-1916/
Yellow/red is supply, 12 volts.
Blue is tail.
Green, low beam.
Yellow, high beam.
http://www.blasterforum.com/general-support-17/downloadable-yamaha-blaster-manual-17325/
03+ supplement:
http://www.blasterforum.com/do-yourself-20/03-06-blaster-repair-manual-supplement-1916/
Yellow/red is supply, 12 volts.
Blue is tail.
Green, low beam.
Yellow, high beam.
Last edited:
Thank you very much Blaaster. We found the yellow wire finally. They had it rolled up and taped. This thing had been redneck enginerred. paid $750 for it , And I probably have about another $1,500.00 in it between some mods , new plastics , and fixing the things they had messed up.
