2 stroke oil level

[Schmidt888]

I have a 01 blaster that I just got and i was Riding with my cousins for about 45 minutes and I notices the oil level in the back by the seat didn't go down I don't know why.....Please help

 

[sporty982000]

Well the mix oil, will not move allot., but to make sure its working, see the video on how to check your oil pump.

/ removing air pockets / bubbles.

 

[Schmidt888]

Where can I find the video?

 

[Awk08]

Where can I find the video?

amazingly, although reported to mix at up to 20:1 ??
the stock oil injection seems to use way less oil than when pre-mixing at 32:1
45 minutes of riding should hardly move the oil level

best bet though, is to remove the injection and pre-mix, then there is no guessing or worries

 

[Schmidt888]

amazingly, although reported to mix at up to 20:1 ??
the stock oil injection seems to use way less oil than when pre-mixing at 32:1
45 minutes of riding should hardly move the oil level

best bet though, is to remove the injection and pre-mix, then there is no guessing or worries

How Hard is it to do that cause I was thinking about it?

 

[Awk08]

How Hard is it to do that cause I was thinking about it?

skill level of about 2/3, out of 10 < being a full rebuild

http://www.blasterforum.com/do-yourself-20/how-remove-oil-injection-without-block-off-kit-3272/

http://www.blasterforum.com/do-yourself-20/how-install-oil-injection-block-off-kit-681/

 

[Schmidt888]

And another thing a little white smoke comes out but not all the Time*

 

[Blaaster]

Smoke is quite normal, but it should be tinged with blue.

If the smoke is white and smelly, it could point to a leaky oil seal.

It would be a good idea to do a leak down test to see if there are any air leaks.

 

[Schmidt888]

Smoke is quite normal, but it should be tinged with blue.

If the smoke is white and smelly, it could point to a leaky oil seal.

It would be a good idea to do a leak down test to see if there are any air leaks.

There is a little blue but to be safe how do I do a leak down test?

 

[Blaaster]

Here you go.

 

[Schmidt888]

Here you go.

How To Perform a Leak Down Test - YouTube

Thanks a lot man

 

[Blaaster]

Np .