1st year 4 hydo brakes?

[hawaiiysr]

what was the 1st year 4 hydro brakes on the blaster?

 

[timsyfz]

the 1st hydro year is 2003

 

[hawaiiysr]

thanks for the info. so setting up an older blaster is as easy as changing spindles and bolting up the new bits?

 

[Blasterb0y794]

Hubs, spindles and the brakes and it will go right on.

 

[hawaiiysr]

could i use banshee spindles? or are the spindles blaster specific?

i was thinking of these arms >>>ASR Yamaha Blaster +3 up 1 Pro Series Racing A-Arms:eBay Motors (item 120456495307 end time Aug-16-09 13:13:41 PDT)
and if banshee spindles could work i would go that route cause they are easier to get then '03 blaster spindles.

 

[ron89]

could i use banshee spindles? or are the spindles blaster specific?

i was thinking of these arms >>>ASR Yamaha Blaster +3 up 1 Pro Series Racing A-Arms:eBay Motors (item 120456495307 end time Aug-16-09 13:13:41 PDT)
and if banshee spindles could work i would go that route cause they are easier to get then '03 blaster spindles.

the banshee spindles look like they may work. if they use a bolt and a nut to hold the upper a-arm into the spindle they it will work with little mods. but if they use the same as stock where the spindle clamps to it they it wont work for ya..