1996 Blaster With FMF pipe not running please Help

[delleroy]

I have a 96 with a FMF pipe and the carb is jetted for the pipe. (i think) it kicks over and sounds like it wants to start and then nothing happens. when i get it going by tugging it and i can spray gas/oil in the carb opening and it will idle. but when i try to use the carb it will start and as soon as the reservoir empty's it quits please help!!!!

 

[Blaaster]

Check for fuel in tank, check petcock, clean and adjust the carb, and make sure the jets are correct for the pipe.

 

[delleroy]

it isnt the gas tank the pet weiner is clean the jets are correct cleaned carb twice the carb is also rebuilt

 

[blasterdemon7]

Check your compression then check your reeds.

 

[bigwill]

+1 on the reeds sounds exactly like what mine did when it sucked a reed.

 

[Racer51]

most likely the reeds. But what size jets are you useing and is it bored out if so what size? With what size carb details details

 

[blasterdemon7]

I based my input on him being sure the carb was jetted correct and working in proper order.