hi guys im just new to this site so hello .. anyways i bought a 06 blaster 2 weeks ago was out on it all day sunday going great . when i started it monday it would not stay started and was very slugish and when i gave it full trottle in died . the rings are ok and i changed spark plug and cleaned carb . when i took yhe parking brake sensor out i started the qaud and it wud rev up 3 or 4 times at full rev but den just cut out . what can i do to solve this problem ??
06 blaster
- Thread starter blasterman12
- Start date
unhook the parking brake switch under the hood. just follow the wire from the front brake perch. then you need to find the wires that come out of the thumb throttle. you need to cut the connector on the harness side and splice those two wires together. then unplug the connector at the tors box. should fix your problem
i disconnected parking brake sensor wire which was green/yellow and black under the hood and the wire that comes out of thumb throttle black/yellow and black . i unplugged connecter at tors but which wires do i splice together .its a jungle of wires under there
i tried everything i still cant get it started . there is spark . it started last nyt for about a min then died and wont start since
Could this be fuel related also.
Fuel starvation from a blockage in the petcock or needle and seat assembly.
Fuel starvation from a blockage in the petcock or needle and seat assembly.
