03 blaster oil injector

[gwatt5]

I have a 03 blaster with Full fmf gold series exhaust
2 stage reeds
4" spacer kit
K and n air filter
Answer alumilite 2 bars
Toothed down sprocket
New plug and coil with wire

It blew up and I can't kick it over because it's frozen. Could it be the oil injector and how could I tell? It was also boggin a lot so I took out the jet and it was a 200 I put in a 230 and it was running better

 

[Blaster30]

Yea.. U might want to block that oil injection quick because if you dont soon that piston of yours will start getting fried like mine... But just to be on the safe side remove the oil injection and just mix ur gas and check your piston before your next ride ASAP!!!!!!!!

 

[Blaster30]

because those oil injectors r known to fail...

 

[Blaaster]

You fried because you ripped it with a #230 main jet when a FMF requires at least #280 or #290 main

The oil injection, even though it mixes at 20:1 will not stop a piston from cooking from using too lean a mixture!,, .

 

[that_rebel_dude]

the oil injector is the frist thing to go i bought my bike and didnt even ride it much befor i pulled my injector off

 

[gwatt5]

my friend i ride with has a 06 blaster and he has his injector on sense he had it and he never had a problem with it

 

[Blaster30]

its ok because you better recommend he take it off because soon it will fail and he will need a new top end sometime this year or next year i guaranteed....

 

[Wifesblaster]

Put a 280 jet in that thing!!!!!!

 

[gwatt5]

it already blew up rode it for an hour with a 230 in it. the dude i got it from had a 200 jet in it...