01 blaster help

01blaster

New Member
Feb 7, 2008
41
0
0
i got my friends blaster outta of his yard after it had been setting up for two years. i had no key so i removed the ignition and hot wired. i then stripped all the wiring after i couldnt get any fire. i then learned that you are suppose to just leave the wires to the key unplugged wich i have now. i have rewired the bike but i still have no spark. i have put a meter on the orange wire that goes to the coil and i get readings but i get no readings out the end of the coil. i have two coils and i cant get either to spark
 
could be the TORS system that failed. recheck all wiring again. why was the bike just sitting in a yard for 2 years????? alot can happen in 2 years out in the weather.
 
Yea remove that TORS its a POS.. I just removed mine tonight and it runs Great ...
 
it is possible you have 2 bad coils also, and make sure you have the right coils!