Recent content by Rich

I dont see how people think its going to bottom out ect.Thinking about it the bike is going to gain about 3 inches of lift and 3 inches of droop.The thing is going to float over hard turrain and depending on how good the shocks are like fully adjustable springs and valving both compressing and...

250r swap sounds sick.IMO that would be the way to go as far as fabbing the blaster.A lot of power and still light and fun to ride.250R is a pretty good motor.

Im really liking thes vrubber venoms.Not sure how they hold up in heavy mud but they got some bite and dig.

Why would you lower it lol.Its a rally car and set up pretty good right off the bat.Not much you can do to improve it.I just looked at one for sh*ts and giggles the other day.Thing putes out like 300 horses or something like that and its a 4 banger.And all wheel drive.30 grand used.Layed the f...

I would just make a sandrail or gocart out of that motor lol...Thats a lot of motor and weight imo...Im all about engine swaps but there are other motors that have better fitment and performance.Old yz 400/450 or newer yz but half to fab radiator.Best has a kx 250 and those are really good...

With more torque you have the power to run a taller gear to gain more top end and still there is plenty of power threw out.If you improve the torque by installing a big bore it has nothing to do with raising the rpm so the final outcome is both will have the same top speed one just has the...

What model hp.What windows are you running and what video card.Is your pc turning on does it sound like its booting up.And also is the monitor power button showing its on.And I agree you should never have your pc in an enclosed area and especially have it by a heater.Pc run hot.The more built...

one has more torgue and would just get to that speed faster:)But with more torque you would regear it with a taller gear to gain more speed.

You can not wear a clutch out if your not using it? If you do it wrong its wear and broken gears.Never force it into another gear.

I build my own pc for gaming and entertainment on my big screen.You would half to give a little more info on your upgrades and prior use and anything changed or did it just start not responding.Do you have another monitor or can you plug that monitor into another pc.Trouble shooting a computor...

Im running a 14/38 with a 19 inch tire.

Cant beat that thats a good dealI:I

Boyesen rad valve with carbon fiber pro reeds.Best on the market.High end and mid end half to do with the spacing of the reed cage.

Price them on ebay that should give you a ball park price quote. I believe scot just sent you a link so you could look the part up.Its the hydrolic shaft that pushes the clutch plate out to dissengage the clutch.Little hole where the clutch housing bolts on.There should be 2 rods.Pute the...

Wish my inner clutch rod would drop out that easy lol.. Dont forget to replace the ball inbetween the 2 clutch push rods.