norman420

norman420

New Member
Messages
172
Media
9
Reaction score
9
Points
18
Joined
Last seen

Profile posts Latest activity Postings Media About

  • n2oforme
    I have heard the name Normand420 on internet while looking for parts for my blaster I have seen the pictures of your spindles that you make and I must say they're very clean nice job.I hope to be able to buy some 1 day for my tri-blaster
    H
    norman420 I am new to the forum but could use some advice on spindles I have stock a arms on my 01 blaster and want to upgrade to disk what spindles will fit and do you have any now if so whats the price to KY.
    sublunacy
    I have an lt250r 1992, I would like to put banshee front hubs on it. Can you confirm they fit?
    yamaha28
    Hey Norman, are you selling any more spindles? I have everything else to get my blaster converted, I just need your spindles!
    J
    hi i was wondering if you could give me a call 401 241 7090 i have an 95 blaster and i beleave i have banshee spinders and brakes... i just bought the atv last week and noticed he drilled out the upper a arm ball joint and put a bolt threw it to hold it to the spindles... im just trying to make sure i have the banshee set up i know its converted to disk im just unsure if its 03 plus blaster or banshee... and how to order yours.. thanks
    J
    i have front calipers from a 03 blaster will these bolt up to you spindles if so how much are we looking at i want to mount these on my 98 blaster also will found a set of banshee spindles for sale will the 03 calipers fit on them and will they bolt up to my a arms and tie rods
    B
    Hello norman420! I am new to the forum, and one of the first things I searched for was brake upgrades, because of obvious reasons, so I am curious if you sell these spindle upgrades or even if you do a whole setup with calipers, master cylinder, ect, and if so what this would run me. Thanks for your time, blastinfools
    norman420
    Yes, they will work. I'll also need a ball joint to get the correct depth on the reamed sockets.

    N
    P
    Thanks for the help. This set should work then?
    YAMAHA RAPTOR 350 2005 LEFT FRONT SPINDLE STEERING KNUCKLE | eBay
    YAMAHA RAPTOR 350 2005 LEFT FRONT SPINDLE STEERING KNUCKLE | eBay
    My 03+ brakes will bolt up without modding will they?
    If so I'll PM you when I buy them. I'll ship them straight to you and paypal you whatever you need.
    norman420
    Raptor 660/700 hubs won't work and everything must be newer than '90. I try to find parts that are at least 2000. Otherwise Banshee, Warrior, and Raptor 250/350 are what you are looking for. I haven't found a yamaha caliper (again newer than '90), that doesn't work.

    N
    P
    Thanks for the reply. Is their any difference between the raptor/shee/warrior hubs?
    Is any one more preferable than the other? Any particular year I should look out for?
    norman420
    Mr. paint the house,

    Blaster spindles don't lend themselves well to Burgard arms. I have reamed many sets of Banshee/Warrior/Raptor350 for these arms. I made a fixture for reaming them on a Bridgeport so the front end geometry can be as good as it can get. With the extended length of the arms the (crappy) stock Blaster shocks are way over matched. Without at least a set of Banshee shocks, you'll get a goofy camber in look. If you dig up a set of spindles (not too hard on this forum) and send them to me with one of the ball joints, I'll ream them for $25 + shipping. Good time to do the hydro upgrade if you're older than '03 also.

    N
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back