Recent content by norman420

  1. norman420

    What would you guys pay?

    Cheaper than an ambulance ride! N
  2. norman420

    Finally upgraded to front hydros

    If your wheels "free-wheel" fine, with the castle nuts loose... Something is up with the bearing stack within the hub. Be sure you have the cone shaped spacer thingy between the bearings. Otherwise I would get a hold of a (measuring) caliper and measure the components of the bearing stack and...
  3. norman420

    Hydro Front Spindles

    Kudos! I believe there is still many sales to be made. Good work Gents. N
  4. norman420

    hydro front brakes

    Yep. 1515151515 N
  5. norman420

    hydro front brakes

    Both. 151515151515 N
  6. norman420

    Need rear hand break!!!

    I can understand why you are Madd. How 'bout running all 3 off of 1 master cylinder. Been working for me for years. Sent AWK a few of these blocks, if you're interested. N
  7. norman420

    hydro front brakes

    As Mr. Awk said. I have gotten out of the spindle business. After 30 years of engaging in a lot of work that involves gripping and twisting and pulling with my hands. A 20 set run of spindles leaves me with aching hands for a month. Also looking forward to getting into some more activities...
  8. norman420

    Converted Front Brakes

    OK... Here's #4 of 5. Skipped over 3, need to edit it a bit. More boring than 2. dandt-1.mp4 video by norman420 - Photobucket I'll try to get the last couple tomorrow. N
  9. norman420

    Converted Front Brakes

    Be careful what you ask for. #2 of 5 roughboss.mp4 video by norman420 - Photobucket This took the place of water boarding. N
  10. norman420

    Converted Front Brakes

    Should have done this a while ago. Would have saved a lot of keystrokes. assembly-1.mp4 video by norman420 - Photobucket The original video was shot in HD and was around 300 megs. Stomped on it 2 different ways to get it down to 30. If this one doesn't put you to sleep, I have videos of...
  11. norman420

    Banshee Brake bleeding???

    BANSHEE 87-01 FRONT BRAKE MASTER CYLINDER REBUILD KIT | eBay Yep, that little polypack is the culprit. I've seen the kits for as little as $9 N
  12. norman420

    Banshee Brake bleeding???

    I'd put a kit in the MC. It'll pump up in a flash. N
  13. norman420

    2003 brake conversion

    No 151515151515 N
  14. norman420

    Huge Tits!

    Didn't I see her floating down the street in the Macy's parade? N
  15. norman420

    '88-'89 Conversion Spindles

    Got a set of conversion spindles for an '88 or '89 Blaster, I'll have delivered to your door for $55. I've tried to sell them on Ebay but they tend to bounce back since most don't know the oldest a-arms are different then the '90 - 2006s. I'm guessing the forum-ites know the difference. N