Recent content by Cocowheats

Well, from what i thought I knew, when staring at it from the front there are 2 black boxes on the right. The top black box ought to be the TOR brain. I removed that a minute ago and she started just fine. I then removed the 2 wires I had jumped from the throttle, no issue and started fine...

I have no idea what year...it is deff. older and pieced together... Maybe I need to unplug the brain as all I did was disconnect the switch in the throttle housing... Either way, after disconnecting the switch in the throttle and jumping the 2 cables together, is the TOR then...

Yes, that's all I did...and then to start it, I connected those 2 wires to each other...so this would=a bypassed TOR, correct? mjgnslngr - That's what I was trying to avoid...not a project for today at least. I just wanted it bypassed at minimum. I thought on older blasters you could literally...

No, I simply cut the cable from the throttle body...I got it to start by touching those two wires together. All I intended was to cut it at the throttle and disconnect the wire at the brain where the connector/plug is and then just tape off the plug, but it won't start if I do that. So I...

Older blaster runs with the TORs cable from the throttle body connected. Once I clipped it at the throttle body and and unplugged the connector under the front plastic(that's as far of a removal as I was planning right now), it wouldn't start....stripped the wires and halfass reconnected the TOR...