Recent content by alive

Spyderco pacific salt, and a well used CRKT folding razel.

Spyderco pacific salt, and a well used CRKT folding razel.

Depends on what kind of trails IMO. One I got done with my smalls mods and work, I took it to a 19mi trail close by in the national forest. Lots of 'humps' (ALOT) but otherwise very smooth. It was great there, I was jumping most of the humps, and I have never ridden a sport quad. It was awesome...

This is the side of that road

It was the harness somewhere. I found a thread on here with a minimal harness which helped me check, now it starts up first kick. However, right front wheel has way too much camber, but im thinking its just bent (rolled the bike down a hill right before I went to do my mods). I guess I just need...

I took off spark plug, and hit kick starter and im not seeing any spark. All wires appear to be connected, tors arent touching each other, ignition (was removed) are taped off and not touching each other, same with oil inject lines.

Finished my small build, and now blaster wont start. It started right up before I tore it apart. Could the spark plug have went bad sitting for 2 weeks? Fuel is turned on. Im not sure what else it could be. I did remove the tors, but I unplugged it from the carb and the little box up front...

Damn cops coming when you ride on property without permission!

Only got a bit in late at night here, but some progress made! Got oil drain plug out. It took a solid 2 combined hours, but i finally got it out. Left front brakes done, flipped front tire. Unfortunately I tried the right side first and didnt know about adjusting the screw all the way out...

Well, got my back brakes done this morning. Wheels on. Looks great with the spacers. Got my fronts off, but I dont have a big enough socket to take the hub off to get to the brakes. Got the carb off and cleaned it. Will put in new jet later. Still have rounded drain plug and rounded oil pump...

It is rounded... Ill have to pick up a pair of vice grips tommorow, I didnt even think of that. Thanks for suggestion

Well, I picked up a 2002 blaster in pretty good condition. I have no vehicle type knowledge, but I decided this will be what I learn on. Im pretty good with working on guns, and I figured im already 24.. I need to learn. Today I started, as I thought all my parts had arrived. Started...

Well i've ordered jets, EBC brakes all around, shorty rear brake cable, FMF pipe, rear wheel spacers! Heres to hoping it turns out nice!

from what I gathered in the 'what jetting' thread, I should get around 290 main, and stock pilot? Do I need to move need position?0.2.