Ok so i bought a yfz 450 shock, it didn't come with any bolts. Do i use the ones on my blaster or do i have to buy some? Oh and when i cut the bottom part of the shock and drill a hole into it do i have to re-thread it?
Yfz 450 rear shock
- Thread starter Zace17
- Start date
You wont have to thread the shock after you cut it...Just buy 2 new bolts 4 washers and 2 Nylon lock nuts and call it a day!
K thanks. One more question the rezzie hits my stock silencer can i bend it a little so it wont touch? Or will that just mess it up?
You do not need to tap the bottom of the shock.Just drill the bottom the same diameter as the stock bolt and use the stock bolt.On the top I used a different sleeve from a hardware store and changed out the stainless one and made the I.D. a little larger to accomodate the stock bolt.In my opinion if you are going to mod a shock make it work with stock bolts.The top shock mount on the blaster frame is larger than the yfz450 mounting hole and if you use a smaller bolt it will eventually move around a bit.IMO
Similar threads
