Would like to thank everyone!

cap9709

New Member
Aug 20, 2012
237
1
18
Kansas
Well, after 3 months, lots of YouTube, and all the help from you guys I have finished up my blaster project. Thanks to all who helped!
 
Engine wise its sound, ill post pics tomorrow if I get a chance! New plastics to come, Jw roughly how much would they cost? And I need to research and do a plug chop.
 
I'm also running a 28:1 amzoil premix ratio. I ride trails mostly but ride mildly hard doing wheelies in the fields. I heard 32 is the best but what I'm runnings probably fine, right?
 
you will get a lot of different feedback on that 50:1 ratio. amsoil suggest running at that mixture for ANY engine you put it in..... still makes me nervous so i go in the middle at 40:1. but i know others that run at the same ratio as you with no issues
 
I mean 50:1* is my current setting.

Never used that. But heard of most that do run 50:1 with no issues on amsoil, Alot has changed in the fully synthetics and If I were to use that i'd stick with what the manufacturer of the oil recommends! I think since they recommend 50:1- I'd say your safe!
 
I always shudder when I read of a 200cc motor running at less than 32:1.

If the oil manufactures say use it then do so, but remember to jet accordingly as lighter oil ratios need smaller jets, plug chop to confirm.