won't start at all

[Blaster95-97]

well it's been about 3 weeks that my blaster won't start. i have gas and air. i have a brand new spark plug. my boot is making good contact. my coil is good. my connections are good. the only thing left are the little black boxes and my magneto. i have a mechanic coming to have a look at it soon!!! I:I but any opinions would be good

 

[Arnold]

What have you tried n what have u checked? What changed from the last time it ran to the first time it didn't start?

 

[itstyler]

Well assuming you have a electrical issue you can unplug the black and white wire directly out of the cdi to delete your safety switches. (somebody correct me if thats the wrong wire).

I use to do this to diagnose electrical problems now i just have an extra everything.

As previously said post what you have done otherwise its just taking shots in the dark.

 

[Awk08]

http://www.blasterforum.com/engine-13/troubleshooting-maintenance-guide-30347/

 

[Blaster30]

check your compression if its under a 100 you definately need new rings or rebuilt top end depending on conditions check it out to save you some money

 

[jarabe1]

Do you have spark?

 

[Blaster95-97]

no spark, i've checked the coil. and it's good. i've made sure all my connections are together. the only thing i could think of is the magneto/flywheel. so mechanic here i come!

 

[JBRoc01blaster]

I'd say its either your magneto or a bad ground ... Is your TORS still hooked up ? A bad/malfunctioning TORS would prevent your blaster from starting, a lot of people on the forum unplug their TORS before any problems have a chance to occur

 

[Blaster95-97]

i've unplugged my tors. i'll try disconnecting my safety switch wires. (whit and black) like some one suggested. if that doesn't work. i'm going to bring it to a mechanic