Wiring

[ruairiyblaster]

Going to use this wiring diagram ther is a junk wiring loom in one of the race bikes so I'm going to make a new one.
http://www.blasterforum.com/attachment.php?attachmentid=4791&d=1318254654

Only question there is no voltage regulator so what do I do with the yellow/red wire?

There is also no on off kill switch button it's just a teather type so do u ground the black/white wire?

 

[Awk08]

if your not running lights you don't need the voltage regulator, just cap off the yellow red wire.

run the black/white and black wires to the 2 tether wires, when connected by pulling the tether from the switch it kills the ignition

 

[ruairiyblaster]

Thanks I need it wired for the first race on Saturday so ill get at it tonight