Why is my blaster doing this sh*t!

Cmh156

New Member
Feb 18, 2009
1,003
10
0
32
Austintown,OHIO.
Well my blaster has sat for about a week after i rode it for 1 week straight everyday for a while. Went to ride today and the pecker would not start. Got a new plug,and sh*t still wouldnt fire. Check compression got a decent amount and got spark with the tors cord by the carb,with it unhooked there is no spark. So i had my friend tow me with his 450r and try and pull start it,it would fire up then when he stopped it would die out even if i had the throttle out all the way.

So his dad who is a motorcycle genius decided to help us. He looked we checked the electronics got spark and sh*t,like i said. He thinks my carb needs taken off and cleaned and rebuilt what do you guys think?
 
yea i would pull the carb and give her a good cleaning. check your reeds wile you have the carb off make sure none of them are warped or brokin.
 
yea i would pull the carb and give her a good cleaning. check your reeds wile you have the carb off make sure none of them are warped or brokin.

Its funny we were sitting there for like 2 hours trying to fix it,he says spark plugs bad and carb needs cleaned and tuned.

Go figure he is right i love his dad ahah,he is tight.

If my reed are bad can i buy like vitos ones and put them on the stock cage?
 
sounds like if ur getting spark, check to see if its getting fuel, ur tank has a screen in it. check and see if the petcock is working correctly. fix the carb.check the float see if its working right

go with the stage 2 carbon flex reeds on the stock cage
 
Yeah I'd clean out the carb real good like your dad said, and also make sure all the wires you removed for the tors arn't messed up or something.
I'd check for an air leak too...

Not my dad i dont have one so i resort to my friends dad haha since he likes me and were cool,always helps me out.

I did not disconnect the tors. We disconnected them and we get no spark.
Connect them and we get spark,could my wiring be bad?

I really just want to take it all off and eliminate stuff i do not need make it like a race harness with the basic stuff but leave headlight wires.
 
sounds like if ur getting spark, check to see if its getting fuel, ur tank has a screen in it. check and see if the petcock is working correctly. fix the carb.check the float see if its working right

go with the stage 2 carbon flex reeds on the stock cage

We noticed that when i turn the fuel on the overflow line starts dripping badly with my precious gas!

Could that mean my carb is all clogged up?

Also what jet should be in it for the dg pipe and silencer?

Im about to head out and rip it off and tear it down and let it dry out and sh*t.

You think brake cleaner is fine to clean it?

I hate working on carbs.