Here's a mod that makes LT80 clutch maintainance easier. Cut the foot pegs apart and put an insert of some kind (pipe or rod) in the tube so you can remove the clutch side with just the 2 bolts.
main guestions are this 1 how to change the tranny fluid 2 it runs good but man it smokes alot any advice on maintnace and well any other pointer will be gratly aprciated
Sometimes LT80's have petcock problems. Fuel can build up in the case & pipe and smoke till it gets burned off. Maintenance is mostly keeping the carb clean & servicing the clutches. I block off the oil pump & premix. Gear oil drains from bottom plug & fills from top plug.
Use a good 10w30 or 10w40. Only takes a little bit. I use a small hand pump with a tube. It's easy to make a mess trying to fill these. A small funnel might work. Fill till it runs out the side hole.
You can see this 1 hasn't been filled in 10 or 20 years...LOL