wheel spacers stud ?

[3 Wh33l3r Rid3r]

i have the rear 3 inch spacers the black ones.. i think there the polyurethane ones that came on my quad, problem is the people that put em on took the wheel studs out of the hub and just put a long grade 8 bolt in there and it doesnt fit right....half the time when i put the wheel back on it wobbles cuz u cant ever get it to line up right..so does anybody know where i can get the stud extensions cuz i cant seem to find em thanks for the help

 

[hotrodaj_2]

Dont now if this will help but try this link.
3" ATV Wheel Spacer Spacers Yamaha Grizzly Big Bear YFZ
Their on e bay and for blasters.

 

[yzrider]

3.5" WHEEL SPACERS YAMAHA RAPTOR 250 350 660 700 : eBay Motors (item 230447552476 end time Apr-08-10 22:57:03 PDT)

3" wheel spacers Raptor YFZ450 450R 400EX Z400 Banshee : eBay Motors (item 220577428475 end time Mar-30-10 22:00:00 PDT)

3" ATV Wheel Spacers Honda Yamaha Suzuki Kawasaki - NEW : eBay Motors (item 180485522056 end time Mar-31-10 09:19:23 PDT)


that good?

 

[3 Wh33l3r Rid3r]

thanks for the links but im looking for the stud extensions for the black polyurethane spacers...i already have the spacers i just dont like the way they have em on there or is this the way that its supposed to be.....no studs at all i guess they knocked em out and just used some long bolts instead

 

[yzrider]

i don't think thats how they go, maybe buy some stock press out studs off ebay if u can find them and put them in?

 

[yzrider]

Yamaha YFZ450 YFZ 450 rear wheel hub stud set atv : eBay Motors (item 250542807543 end time Apr-03-10 17:08:16 PDT)

these should be the same thing, all quads pretty much use 10mm studs or somthing like thet.

 

[3 Wh33l3r Rid3r]

is there an extension that goes on the stud to go through the spacer

 

[yzrider]

idk, i thought a stock stud might work in the spacers??? idk though

 

[NOVIS]

idk, i thought a stock stud might work in the spacers??? idk though

no the stock stud only fits throught the rim. it isnt long enough to go through the spacer and the rim.

you are talking about the ring spacers right? if not never mind what i just said lol

 

[yzrider]

yeah, i'm talkin bout ring spacers

 

[3 Wh33l3r Rid3r]

these are the spacers i have but mine just have a bolt through the hub, spacer and rim


BLASTER 200 YFS 200 REAR WHEEL SPACERS : eBay Motors (item 170460664813 end time Apr-16-10 14:19:01 PDT)

 

[yzrider]

idk dude, i couldn't find any studs for u on there, contact the seller and see if u can buy some of the studs from him

 

[3 Wh33l3r Rid3r]

appreciate the help

 

[hotrodaj_2]

I've never seen a stud that long. How long does it have to be. I would look on e-bay, find a similar spacer and ask the how theirs mounts. You know, B.S. them, make them think you might buy one.

 

[4cfed]

i had durablue spacers on my 200x.. they were a square block, knock out the stock studs, 4 long grade 8 bolts. slide threw hub, spacer than rim.. but the bolts didnt slop around so they were allways straight and no wabble

 

[hotrodaj_2]

Hey dude you can try this. Make a hole big enough for a nut and countersink a hole in spacer where stock stud is on stock hub. Make the spot that the stock stud goes through spacer shorter. You can make mounting spot 1" wide after making hole in spacer, use stock stud, slip nut in hole you just made in spacer and tighten her up. Hope I did'nt confuse you But thats how I would do it.