what jets should i be runing?

[kx80berger]

ok this is my 3nd post about jetting because i like to buy parts. well now i think i have all the motor parts i am going to get. i have the vitos jet kit. should i run the vitos neadle or the stock i think the stock bu5t were should i run the clip? thanks
Heres what i got done to it:
67.75 pro light piston
trail port and polish
head milled .0035
ptr mid rev pipe
fat boy 2 duncan silencer
sparky spark arrestors
pod filter
oil injection blocked off
4 degree timing advance
and a twist throtle

 

[Blasterdude27]

I'd bump the piolet up a size and start with a 310 main, see where that takes you.

 

[fioz600r]

I have heard the Vitos needle is no good. I would use the stock needle clip in the middle 3rd down from the top.

 

[stephen12091985]

do you have a stock carb or what size carb you got

 

[kx80berger]

oh ya its a stock carb

 

[2stroke4ever]

when your adding parts, add one at a time, jet for each part as you install it, what if you run into a problem after you just installed 3 different things, were would you start, one at a time truuuuuust me, i see this all the time and in the end you just take it back to good running order and do them one at a time eitherway

 

[kx80berger]

ya but its all done now

 

[kx80berger]

and i have vitos reeds

 

[kx80berger]

anybody know...

 

[Blaster200boy]

you need a bigger carb...try a Keihin 34mm PJ