what difference on 88 and 2003 blaster engine

[I8ford]

I have a question for the master on you ! I have a blaster 88 and i restore on new, with a parts on ebay ,most of part is a 2003 . stator, complete wire ,cdi is from a 2003 or 2005 do you thing we dont have a difference on this part for 88 and 2003 ?


i'm sorry for my english but i'm a french guys on quebec. your forum si the better we have never see.

tank

 

[woodwardspecialties]

not sure there is much difference....

i have a bunch of 01 blaster parts... if you need anything that i might be of help with please let me know, id be glad to ship to Canada too.

Please pm me.

 

[pittboss45]

The only difference is the stator, wire harness, cdi and the parking brake circuit.

 

[I8ford]

pittboss45 : i was put a stator 2003 on my 88 with the complete wire on the bike with the cdi of 2003 , do you think is work or not ?

 

[I8ford]

my probleme si , we dont have fire on spark plug . we pull on the light and it work when i start , but no fire , do you have a idea for me to chk

 

[HOBBYHORSE]

push the thumb throttle and listen for the TORS micro switch to click, then crank it over. if it fires, the swtch is bad. i got my last 3 blasters at a deal because the switch was bad and the owner could not figure it out. i just
unplug it and keep on going.

 

[I8ford]

hish ... now we have fire , gaz and air , but he dont run... ho to adjust the tors screw ??

 

[pittboss45]

pittboss45 : i was put a stator 2003 on my 88 with the complete wire on the bike with the cdi of 2003 , do you think is work or not ?

Yes it will but you'll need the coil also.

 

[oldskool0317]

even when you look at the ricky stator site they have the wiring differences not much like 2 wires

 

[oldskool0317]

here

http://www.rickystator.com/05technical/01installation/img/yamaha/RSMY1-BP.pdf

 

[BLASTER POWER]

ya i think you need a coil 2

 

[I8ford]

i have news on my blaster , we have gaz , fire and air but hi dont run . we try to run when y put the gaz over

 

[I8ford]

I have find the problem.

i change the stator , wire , and cdi to 2003, but he have one connector gray on front harness to bypass, and the blaster run.