What carb to buy

[2kuik4u]

What kind of carb should i get if i am getting a oil injection block off kit for my blaster. Or should i just keep the stock one and re jet it??

 

[Braapbraap95]

its all up to you if you have any mods go for a bigger carb if not or you want to take the cheap route keep the stocker.

 

[2kuik4u]

Carb

what do you mean by bigger carb?? Is that what the mm stands for?? Right now my carb is a 28mm how big would you go??

 

[Braapbraap95]

your carb is then not stock. the stock i beleive is a 26 (yes mm). so i would stick with what chya got. jetting, i have no clue.

 

[98blaster+4]

what mods do you have on it right now?
and what other mods are you planning on doing?

 

[hickskateboarder]

if your just getting an oil injection block off kit ur probably not gonna need to rejet. thats not really a performance modification per se

 

[Braapbraap95]

yes in some cases it is. you could mix 50-1 rather than the stock mixture making your engine move free-er and advancing horsepower dildo. lol

 

[2kuik4u]

carb

well i did have a aftermarket silencer and could not go full throtle with it on so i took it off and put the stock silencer with the pipe on it and it runs fine now. So i dont know if i should put the other silencer on anymore or not. And i was planning on getting a big bore kit.

 

[Braapbraap95]

if you get a big bore kit be sure to get it ported. and for a big bore carb get a keihen airstryker 34-36(mm)

 

[SMITTY]

What about if you just port the stock jug without a bore job. Will the stock (but heavily jetted) 26mm be enough?