vito

its a worthless mod...no power or anything like that...unless you have a leak then you dont need a new set...

its the exact same thing as milling the head .015, so if you think thats worthless than your dumb, but i wouldnt buy it because i would mill the head more at around 030 for pump gas, if i were you because its still on the safe side.
 
  • Like
Reactions: blasterboy91
as i read this i look at the mods on your machines. i see a lot of milled heads! it sounds like the gasket set is sorta mickey mouse. what do I want for 20 bucks? I shall investigate having headwork done.
 
its the exact same thing as milling the head .015, so if you think thats worthless than your dumb, but i wouldnt buy it because i would mill the head more at around 030 for pump gas, if i were you because its still on the safe side.

yooooo....caught my mistake...typo on me...my bad your right i mis read it all and was thinkin bout something diff... +1 for pointing it out
 
yooooo....caught my mistake...typo on me...my bad your right i mis read it all and was thinkin bout something diff... +1 for pointing it out

i see i called you dumb lol, ill take that back;) but ya its not worthless, but more like not worth it because head is permanent, much better option.
 
you can get a oem top end gasket at local yamaha dealer, where i live its $10, you might find one cheaper online, but with shipping it wont be much different. ive re used the copper top end gaskets, ive doubled up on them as well with no problems, not saying to do this, just saying they are pretty re usable if not nicked or bent.