tusk d-flex handguards
- Thread starter yamaha205205
- Start date
ik that but what are the other bolts for and the longest bolts dont get the handguards tight when you tighten them with the nut
ok well put the clamps on with the shortest bolts on your bars. then put the longest screws in your guards, or vise versa
cant right now for the life of me man, lol i am leaving tomarrow after school, its on the trailer, hang on let me look through some pics
the short bolts go to the bars and the long ones hold the guards to the clamps that are on the bar
green box= you put that on the bar, just undo the screws
red box= you put them scres in the slit in the aluminum braket and through the guard to hold the guard on.
purple box= those are the aluminum clamps you need
red box= you put them scres in the slit in the aluminum braket and through the guard to hold the guard on.
purple box= those are the aluminum clamps you need
this is what you do. the short bolts go to the clamps. since there is 4 of them. now after the clamps are installed the long bolts go to the hand guard itself and bolt that up to the clamp that mounts on the bar and ta da youv got hand guards. or you can put the clamps on the hand guards first and mount as one unit. your choice
hye buddy get off this topic i wanted green and you stole it from me, ass holeX(
JUST KIDDING GOOD EXPLAINING
gave ya both sum green.....lol but now what are the screws for
the screws go on the clamps that bolt on to the bars. never mind lol were just gonna call them extras lol
Similar threads
