Transmission Problem

[SHOWDOWN]

Hello,
I have recently purchased a 1996 200cc Blaster and its leaking the yamalube out the top of the crank case as fast as I can put it. I have done a lot of this type of stuff so if someone can help me out eith what they think the cause of this I would appreciate it

Thanks

 

[ron89]

mm if its on your clutch side, u have have a blown clutch cover gasket ..

 

[89custom]

or just loose screws/missing screws. snug em all up and just check for cracks maybe.

 

[SHOWDOWN]

It's on my kickstart side and I have tightened all the bolts as snug as I can and have found no cracks

 

[ron89]

yeah your clutch cover gasket prolly went, mine went but it didn't poor out it just like dripped ..

 

[SHOWDOWN]

When I go through the first couple gears it doesnt do it when I get towards top end it just lets go and gushes I will take it apart and see if its the gasket

 

[SHOWDOWN]

Ok so I got the transmission fixed and it worked great for a hour I got home turned the key off and there was a big clunk in the transmission when i turned off. Is this my clutch slipping with the Valvoline 4 stroke 20/50 I put in the crank case or a more terminal problem?

 

[Darrell]

Ok so I got the transmission fixed and it worked great for a hour I got home turned the key off and there was a big clunk in the transmission when i turned off. Is this my clutch slipping with the Valvoline 4 stroke 20/50 I put in the crank case or a more terminal problem?

lmao..yea, this could be the problem captain!!

 

[89custom]

... only yamalube 10W30 or even better, bel-ray gear saver 80W90 gear oil.

only use stuff for atv transmisions. no car stuff it will mess up the clutch.