cmblaster New Member Dec 14, 2012 66 0 0 sevierville tennessee Dec 18, 2012 #1 If i have the case off that covers the clutch basket and gears i can turn the crank. But every time i put that outer case back on i can no longer turn it. Anybody have any ideas why cause i'm lost
If i have the case off that covers the clutch basket and gears i can turn the crank. But every time i put that outer case back on i can no longer turn it. Anybody have any ideas why cause i'm lost
Wifesblaster Built not bought Feb 10, 2012 3,513 111 105 45 Maryland Dec 18, 2012 #2 We had this same problem when we put a Vito's +3mm crank in. You have to make sure the bearings are seated ALL the way.
We had this same problem when we put a Vito's +3mm crank in. You have to make sure the bearings are seated ALL the way.
Awk08 Administrator Staff member Technician Jan 30, 2009 24,427 2,294 175 Usa Dec 18, 2012 #3 http://www.blasterforum.com/engine-13/kor-engine-assembly-no-crank-puller-needed-51169/
cmblaster New Member Dec 14, 2012 66 0 0 sevierville tennessee Dec 19, 2012 #4 Thanks. You was right. I had a bearing that was out of line just a hair