Sprocket Sizing Question

[masterblaster97]

I am looking to get my blaster some more speed. I have an 11 tooth sprocket in the front, and a 40 tooth in the rear. I would rather replace the sprocket in the front rather than the one in the rear. What size sprocket should I get for the front that won't ruin my clutch, and will get me some descent speed. Keep in mind thgat my blaster is mostly all aftermarket, so power is not really a problem. I am sick of going slow. Thanks

 

[fastLANE]

put a 13 in the front. That will give you more top end. a 38 inthe back would be nice to. Rule off thumb......larger in front more top end ...larger in rear more bottom end and vice versa, smaller in front more bottom end smaller in rear more top end

 

[blasterfreek30]

isnt a 13 tooth a stock size?

 

[fastLANE]

yeah, but he has an 11 that is robbing him of top end.

 

[blasterfreek30]

wouldnt a 14 be better!

 

[fastLANE]

depends on what he is looking for . Hell he can do 18 in the front and 30 in the rear and hit over 100 if you want to just through anything out there. I was just giving him a sugestion and how to calculate more top end .

 

[masterblaster97]

Thanks guys