spacers
- Thread starter blaster195
- Start date
You can find them on ebay from 20.00 and up. All ya do is unbolt the wheels slide or screw them on and put the wheel back on. You do know you can turn the front wheels around and get 5 inches wider.
its actually, just plus 2" from flipping the front wheels because they are 2on3 wheels so you only gain an inch on both sides by flipping
wat does "flipping ur tires mean" are u actually flipping the tires or doing somthing else to them if u do jus flip them how would u put them bac on cause i dont think for sure you can bolt them to the alxes.
flip the front rims and tires, the they bolt up backwards, put the outside of the rim to the inside it only takes 2 min to gain some width, unless your front tires are directional but most fronts arent.
R
rgs3
Guest
Do you do this to the rears too? How much do you gain for the rears? is it worth it? how many of you actually do this?
you can only do it to the front.
and when you do flip the fronts, make sure your valve stems are clear of the brakes.
many many many people do it.
and when you do flip the fronts, make sure your valve stems are clear of the brakes.
many many many people do it.
the back stock rims will be the same either way you flip them, aftermarket rims you can and you will gain a couple inches.
We did this to an 01 blaster so I tried when i got my 03 and the valve stems hit the brakes....
Guess I'll have to build/buy some spacers
Guess I'll have to build/buy some spacers
C
chris61988kb
Guest
