So here it is! 04 blaster

[Blasterr]

Okay so most of you know I went and got a blaster for only 200 bucks . I'm on my way home right how in a little jimmy. I didn't have a trailer so we managed to do this . Here are the pics ill get more when I'm home .

 

[scotj77]

lol nice find man

 

[Surfrjag]

tight fit!! good deal too!

 

[Blasterr]

Yeah it's got everything with it, VItos 240 sleeve

 

[slickerthanyou]

AWESOME! I wouldn't of passed that up either!

I'm craving a long rod 240!

 

[Blasterr]

Sell you it haha

 

[Blasterr]

Actually I'm not too sure about the Vito's 240 sleeve. It's a Vito's 240 piston with lowered exhaust port and a 240 sleeve but idk how to see if its Vito's

 

[slickerthanyou]

Take a pic of the cylinder intake side inside, post it up!

I'm sure one of us will be able to tell.

 

[Blasterr]

Give me about an hour no home yet

 

[Blasterr]

Okay I'm home, here are pics . I will put the number of the pic and I have a question or statement for each.
1- the quad I paid 200 for
2- here is the piston, can I reuse it? Rings stick out far
3- I see the spaces on the rings but I can't find where they clip in, do the Vito's not have the little clips for them?
4- here is the sleeve, do I need a home or bore? Or can I reuse?
5- and then here is the sleeve , 73mm

 

[Blasterr]

Piston.............

 

[Blasterr]

Rings......................

 

[Blasterr]

Sleeve!!!!!!!!!!!!!!!

 

[Blasterr]

And at last BBK anyone know what kind of sleeve or if its on there good?

 

[slickerthanyou]

That piston looks to have a little damage on the skirt due to slapping. Hard to say...

 

[Blasterr]

So send to ken and get a bore and a wiseco piston to match?

 

[slickerthanyou]

Lets see a pic of the intake

 

[Blasterr]

And Im not sure what kind of sleeve it is or Idk how to check if it needs resleeved

 

[slickerthanyou]

So send to ken and get a bore and a wiseco piston to match?

73mm is maxed out! So would depend on how bad the scratches and bore are!

 

[Blasterr]

I think it's stock